 |
 |
 |
|
The all-new CHASE Edge is a race-ready BMX machine designed for riders who are serious about elevating their BMX racing. This upgraded model features Shimano hydraulic disc brakes for superior stopping power (on Junior size and above), new Chase 24mm 2-piece alloy cranks (on Expert XL and above), and a refreshed gearing and crank setup. The bike also boasts a striking two-tone paint job and graphics, along with a closed rear dropout system with an integrated chain tensioner.
The Edge frame is constructed from hydroformed, triple-butted 6061 aluminum tubes with an integrated head tube, ensuring both strength and lightness. Additional high-performance components include a 4130 chromoly fork and handlebars, double-wall rims with a triple engagement rear cassette hub, and TIOGA tires. With these advanced features, the CHASE Edge stands out as one of the most sophisticated BMX race bikes on the market today.
- FRAME: CHASE Edge Pro 20.5″ Top Tube, Triple Butted Hydroformed 6061 T6 Alloy, Enclosed rear dropouts, Integrated Chain tensioner system
- FORK: CHASE Edge Pro, Full Cr-mo, 1-1/8″ Steer Tube
- STEM: CHASE Edge 50mm
- HANDLEBAR: CHASE Edge 7.5″
- HEADSET: Integrated Sealed Bearing
- CHAINRING: INSIGHT 42T 4 Bolts BCD 104mm
- CRANKSET: CHASE Edge 2 Pieces Alloy 175mm
- HUBS: CHASE Edge Pro 3/8″ Axle, Sealed Bearings, Steel Cassette Body, Triple precise Rear Hub Clutch System with ISO disc brake standard (3 Pawls at Triple Angle Engagement for 24T Ratchets), 16T cog
- RIMS: CHASE Edge 150 Double Wall 20″x1.50″, 32H Front and Rear
- TIRES: TIOGA PowerBand 20″x1.85″ Front and PowerBlock 20″x1.60″ Rear
- BRAKES: Shimano Hydraulic BL-MT200(R) / BR-MT200(R) ISO 140mm
- SEAT: CHASE Edge Pro Pivotal
- WEIGHT: 20.6 LBS / 9,37 KG WITHOUT PEDALS
- RIDER SIZE: 4′ 11,8″ – 5′ 5,4″ / 1M52 – 1M66
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Specs & Information
- FRAME
- CHASE Edge Pro XXL 21.5″ Top Tube, 6061 T6 Alloy Triple Butted Hydroformed, Integrated Head Tube, Enclosed Rear Dropouts And Chain Tensioner System
- FORK
- CHASE Edge Pro Full Cr-mo, 1-1/8″ Steer Tube With Tapered Blades
- HANDLEBAR
- CHASE Edge 22.2mm, 8.5″ Rise, 29″ Wide, 12° Back Sweep, 1° Up Sweep
- GRIPS
- INSIGHT C.O.G.S 145mm Alloy Clamps Laser Etched Logo, PVC End Plug
- STEM
- CHASE Edge 50mm 6061 T6 Alloy Laser Etched Logo
- HEADSET
- Integrated IS 42/42 1-1/8″, Sealed Bearing
- CRANKS
- Chase Edge 2 Pieces 24mm Axle Crank 175mm Alloy Arm With Laser Etched Logo, Cr-mo Chain Ring Bolts / Nuts
- BOTTOM BRACKET
- 118mm Sealed Cartridge ISIS BB
- CHAINRING
- INSIGHT 44 Tooth 4 Bolt 104mm 1/2"x3/32" 5mm Alloy Ring
- CHAIN
- KMC Z1 narrow 1/2″x3/32″
- PEDALS
- Pro Platform 9/16″ Barrel Polished With Grip Nodes, Axle Boron Steel, Ball Bearing
- RATIO GEAR
- 44x16
- SADDLE
- CHASE Edge Pro Pivotal
- SEAT POST
- Pivotal 27.2x250mm Alloy
- SEAT POST CLAMP
- CHASE Edge QR Alloy 31.8mm
- FRONT RIM
- CHASE Edge 175 Double Wall 36H 20"X1.75" Schrader Valve
- REAR RIM
- CHASE Edge 175 Double Wall 36H 20"X1.75" Schrader Valve
- FRONT HUB
- CHASE Edge Pro, 3/8″ Axle, 36H, Sealed Bearing
- REAR HUB
- CHASE Edge Pro ISO, 3/8″ Axle, 36H, Sealed Bearing, Steel Cassette Body with 3 Pawls at Triple Angle Engagement for 24T Ratchets
- COG
- 16T steel
- SPOKES
- Front 184mm, Rear 180/181mm, 14 Gauge, Steel
- NIPPLES
- 16mm, 14 Gauge, Brass
- FRONT TIRE
- TIOGA PowerBand 20″x1.85″ Wire Bead
- REAR TIRE
- TIOGA PowerBlock 20″x1.60″ Wire Bead
- TUBES
- 20″x1.50″-1.75″ Schrader Valve
- BRAKE LEVER
- Shimano Disc Brake BL-MT200(R) Hydraulic
- REAR BRAKE
- Adaptor 140mm Setup, With Shimano Disc Brake Caliper BR-MT200(R) Hydraulic Resin Pads And 140mm Rotor
- CHAIN TENSIONNERS
- Integrated Built-In With New Lock Disc Adaptor
- WEIGHT
- 20.8 LBS / 9.43Kg without pedals
- FRAME SIZE
- Pro XXL
- RIDER SIZE
- 5'8.9" - 6'1.6"
|
|
|
|
|
|
|
