 |
 |
 |
|
Enve Composites SES Aero Road Stem:
What It Is
An aerodynamically honed stem with adjustable length and angle to optimize your position. Linking handlebar to fork, the stem was developed with Team Dimension Data for the refined ride response and control needed in a critical area of the bike.
This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise.
Why We Made It
The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag savings.
Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel desired by the best riders in the world.
Who’s It For
Racers, triathletes, and performance-focused riders looking to optimize their position and improve overall aerodynamics, while maintaining the stiffness and comfort needed for speed.
Full Details
Our approach to aerodynamics has always been to find the best solution for the complete system of the bike and rider, because we understand that there is more to aerodynamic performance than a low drag figure in the wind tunnel. This approach can be seen in our wheels, where we target stability alongside drag reduction to make you as fast as possible on the road in real conditions, where it counts. It can also be seen in our pioneering SES Aero Road Handlebar, which delivers a speed boost through rider positioning as well as its shape. The SES
Aero Road Stem is the natural partner to that handlebar, using the same parallel design considerations. First, we developed a shape with reduced frontal area, smoother airflow, and lower drag. Next, we designed in beautifully simple methods for adjusting the angle and fine tuning the length. The result is a lightweight stem that fits any of our handlebars and makes you faster.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Specs & Information
- Material Carbon
- Length 100, 110, 120, 130, 140mm (+/-2.5mm with 12° shim)
- Weight 170, 175, 180, 185, 190 grams
- Rise -12° fixed, -17°/-7° with angle shim
- Clamp Diameter 31.8 mm
- Steer Tube Clamp Diameter 1 1/8"
- Faceplate Material Aluminum
- Hardware Material Titanium
- Stack Height 42.5mm with length shim / 45.5mm with angle shim
- Torque Spec: Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm
- Torque Spec: Steer Tube 5.5Nm
|
|
|
|
|
|
|
