 |
 |
 |
|
Garmin Tacx Booster Trainer: The Booster is the most powerful basic trainer and can generate high resistance at low speeds. If you set the handlebar resistance lever to a high position you have to exert a lot of force while advancing slowly, just like when you tackle a steep climb. This makes the Booster highly suitable for power based workouts.
The Booster is controlled by a lever on your steer, allowing you to set the resistance as required. The higher the position, the more resistance.
Train with the Tacx Training app, Tacx Cycling app, Zwift or TrainerRoad on the basis of virtual power using the Tacx speed and cadence sensor (not included)! This transmits your speed and cadence wirelessly via ANT+ or Bluetooth Smart to your tablet or smartphone, so you can also use these popular training applications with a basic trainer.
| Type of trainer | Basic trainer with magnetic brake |
|---|
| Magnets | 2x8 Permanent ferrite magnets |
|---|
| Transmission | Roller, 30 mm |
|---|
| Electrical requirements | No mains voltage required |
|---|
| Power indicator | None |
|---|
| Connection indicator (ANT/BT) | None |
|---|
| Firmware upgradable | No |
|---|
| Suitable bikes | Race, Tri & MTB , if necessary with axle skewer |
|---|
| Suitable axles | Width of rear fork: Race 130 mm, MTB 135 mm. Adapters for other widths available |
|---|
| Supplied with | Front wheel support , Quick release for road bikes and mountain bikes (5mm) |
|---|
| Max. power (40 km/h) | 1050 Watt |
|---|
| Max. incline | n.a. |
|---|
| Simulation of descent | No |
|---|
| Max. torque | 17 Nm |
|---|
| Max. brake force | 50 N |
|---|
| Flywheel | Actual of 1,6 kg |
|---|
| Mass inertia | 9.18 kg (20.2 lbs) |
|---|
| Calibration | n.a. |
|---|
| Footprint (lxw) | 675 × 650 mm (26.6 × 25.6 in) |
|---|
| Height | 410 mm (16.1 in) |
|---|
| Dimensions when folded | 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in) |
|---|
| Weight | 8.53 kg (18.8 lbs) |
|---|
| Article number | T2500 |
|---|
| Wireless communication | None |
|---|
| Control by | Handlebar resistance lever with 10 positions |
|---|
| Output | n.a. |
|---|
| Read out on | n.a. |
|---|
| Accuracy | n.a. |
|---|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Specs & Information
- FEATURES
- Type of trainer Basic trainer with magnetic brake
- Magnets 2x8 Permanent ferrite magnets
- Transmission Roller, 30 mm
- Electrical requirements No mains voltage required
- Power indicator None
- Connection indicator (ANT/BT) None
- Firmware upgradable No
- Suitable bikes Race, Tri & MTB , if necessary with axle skewer
- Suitable axles Width of rear fork: Race 130 mm, MTB 135 mm. Adapters for other widths available
- Supplied with Front wheel support , Quick release for road bikes and mountain bikes (5mm)
- SPECIFICATIONS
- Max. power (40 km/h) 1050 Watt
- Max. incline n.a.
- Simulation of descent No
- Max. torque 17 Nm
- Max. brake force 50 N
- Flywheel Actual of 1,6 kg
- Mass inertia 9.18 kg (20.2 lbs)
- Calibration n.a.
- Footprint (lxw) 675 × 650 mm (26.6 × 25.6 in)
- Height 410 mm (16.1 in)
- Dimensions when folded 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in)
- Weight 8.53 kg (18.8 lbs)
- Article number T2500
- DATA OUTPUT AND CONTROL
- Wireless communication None
- Control by Handlebar resistance lever with 10 positions
- Output n.a.
- Read out on n.a.
- Accuracy n.a.
|
|
|
|
|
|
|
