 |
 |
 |
|
Marin Alpine Trail E 29 Mountain E-Bike: The Alpine Trail E will take you further, faster, allowing you to tackle the most aggressive trails either up or down.
We didn’t just add a battery, motor, controller to the Alpine Trail and call it a day. The Alpine Trail E was designed as a whole system, with everything from the frame to drivetrain to the individual components being individually selected to give the rider the best eMTB experience available.
Shimano’s STEPS system is both powerful and lightweight, with the mid-drive motor down low to help ensure that the Alpine Trail E performs like the analog version, but with a 250W boost. Three levels of power give riders options to balance electric power, speed and range. Electric assist up to 20mph in the US, 25km/h in Europe.
The electric features are built in, with an integrated and removable downtube battery, top tube power button, and side charging port encased in the forged motor cradle.
The full Shimano STEPS system comes with the peace of- mind that only a technology leader like Shimano can provide. With years of expertise, our customers can rest assured that they have some of the best global support available to them.
WHEEL SIZE: 29” FRONT / 27.5” REAR
SIZE RANGE: S, M, L, XL
SUSPENSION: 160/150mm
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Specs & Information
- FRAME
- Series 4 Alloy Frame, 150mm MultiTrac Suspension, Integrated Battery/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
- FRONT SUSPENSION
- X-Fusion Trace 36 RC, 160mm Travel, 29", 110x15mm Bolt-On Axle, 44mm Offset
- REAR SUSPENSION
- X-Fusion 02 PRO RXC, Compression and Rebound Adjustment, Custom Tune, 205x65 Trunnion Upper Mount, 25xM8 Lower Mount
- RIMS
- Front: Marin Aluminum Double Wall, 29" Diameter, 32mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible; Rear: Marin Aluminum Double Wall, 27.5" Diameter, 38mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible
- HUB REAR
- Forged Aluminum, 148x12mm, Disc, 32H
- HUB FRONT
- Forged Aluminum, 110x15mm, Disc, 32H
- SPOKE, NIPPLES
- 14g Black Stainless Steel
- TIRES
- Front: Vee Tire Co. Attack HPL, 29x2.5", Top 40 Tubeless Compatible Rear: Vee Tire Co. Crown Gem, 27.5x2.8”, TACKEE Compound, Tubeless Compatible
- DERAILLEUR, REAR
- Shimano CUES 10-Speed
- SHIFT LEVER
- Shimano Deore, 10-Speed, I-Spec EV
- CRANKSET
- Shimano EM600, 160mm Length, 38t Chainring
- MOTOR
- Shimano Steps EP6 Drive Unit, 250W, 85Nm
- CHAIN
- KMC X-10E, Silver
- CASSETTE
- Shimano Deore 10-speed 11-46T
- BRAKE, FRONT
- TRP Slate Evo, 4-Piston Hydraulic Disc, Metallic Pads, 203mm Rotor
- BRAKE, REAR
- TRP Slate Evo, 4-Piston Hydraulic Disc, Metallic Pads, 203mm Rotor w/ Speed Sensor
- BRAKE LEVERS
- TRP Slate Evo, 4-Piston Hydraulic Disc
- HANDLEBAR
- Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back
- STEM
- Marin 3D Forged Alloy, 35mm
- GRIPS
- Marin Grizzly Lock On
- HEADSET
- FSA No 57E, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
- SEATPOST
- TranzX, YSP18JL, 1x Remote, Size S 150mm Travel, All Other Sizes 170mm Travel, 30.9mm
- SADDLE
- Marin eMTB Saddle
- PEDALS
- Marin MTB Plastic
- BATTERY
- BT-8035L, Internal 504Wh
- DISPLAY
- SC-E600 Display
- SWITCH
- SW-EN600L Left Hand Switch for Assist Mode Change
- EXTRAS
- Shimano CS-EM800
- EXTRAS
- Shimano Battery Charger EC-E6002, Shimano CS-EN800 Chainguide
|
|
|
|
|
|
|
