|
|
|
|
Niner WFO e9 3-Star SRAM SX Eagle E-Bike: You’re free. Free to pedal instead of shuttle. Free to roam, explore, and ride whatever you want, whenever you want, with nothing holding you back other than your imagination.
Your access to the rowdiest terrain, steep backcountry lines, and local chunder just got a lot better. With aggressive geometry, 180mm suspension travel, a coil spring, 29” front wheel / 27.5” rear wheel, and Bosch Performance Line CX drive system, the WFO e9 is ready to punch your ticket to the top of any trail and capably carve its way down.
180mm suspension travel: a remarkably supple, balanced suspension curve riding on a coil spring, ready to tackle the toughest terrain.
Welded 6061 aluminum frame and one-piece motor mount: unifies the upper and lower pivot locations with the shock mount for exceptional stiffness. Forged seat- and chainstay yokes, rocker arm, hollowed dropouts, plus our signature Enduro Max Black Oxide pivot bearings, make this all-new Niner chassis rock solid.
Bosch Performance Line CX motor: delivers smooth pedal assist with no surprises. Torque sensitive, zero-lag power delivery is predictable in all conditions. And the 625wh battery means you can ride farther without fear of losing the juice.
29er front/27.5+ rear wheel setup: The smaller rear wheel keeps the chainstays short for snappy trail manners and offers up massive traction.
- Fourth generation Bosch Performance Line CX motors for smooth, predictable power, lighter weight, compact size, and best in class service.
- One-piece, cast and post-machined alloy motor mounts for strength and stiffness.
- Integrated 625wh Power Tube batteries for extended range.
- Built with Niner design, engineering, and DNA, for rider-focused performance and handling.
- Tested tough for years of durability and riding duty on dirt.
- Externally accessible downtube batteries for easy charging and transport.
- Niner-tuned Horst link suspension systems optimize kinematics for the specific demands of eMTB riding.
- “Right side up” trunnion mount shocks with bearings in rocker link minimize rotational friction for supple, ground-gripping suspension.
- FRAME FITTINGS AND MOUNTS 1 BOTTLE CAGE IN FRONT TRIANGLE
REAR SUSPENSION TRAVEL 180MM MAXIMUM FRONT SUSPENSION 180 FORK OFFSET 44MM SHOCK SIZE 205X65MM TRUNNION SHOCK MOUNTING HARDWARE UPPER - M10 X 21MM, LOWER - M8 X P1.25 X 60MM SUGGESTED SHOCK SAG 30% (19.5MM) SEATPOST SIZE 30.9 SEAT COLLAR SIZE 34.9 CABLE ROUTING INTERNAL FRONT DERAILLEUR N/A HEADSET SIZE SHIS DESCRIPTION ZS44/28.6 | ZS56/40 PIVOT BEARING SPECS 8 X 15X24X5 ENDURO BO MAX, 2 X 12X24X6 ENDURO BO MAX, 2 X 10X22X6 ENDURO BO MAX, 2 X 17X26X10 ENDURO DOUBLE ROW CHAINRING COMPATIBILITY BOSCH GEN4 MAXIMUM CHAINRING SIZE 36T Q-FACTOR 176MM ISCG COMPATIBILITY BOSCH GEN4 BOTTOM BRACKET TYPE N/A BIOCENTRIC COMPATIBLE? N/A BRAKE MOUNT TYPE POST MOUNT MAXIMUM REAR ROTOR SIZE 203MM REAR WHEEL SPACING 12X148MM REAR WHEEL THROUGH AXLE SPEC 12 X 180MM, M12 X P1.75, L20MM FRONT WHEEL AXLE SPACING 15X110MM FRONT WHEEL THROUGH AXLE SPEC ROCKSHOX 15MM BOOST MAX TIRE SIZE 27.5 X 2.8 REAR / 29X2.6 FRONT
Niner x Bosch Our new e9 series of ebikes is powered exclusively by Bosch, a global leader in ebike technology. The Bosch Performance Line CX is the best choice for Niner’s e9 series. - Bosch’s latest Performance Line CX Gen 4 motor is smaller by 40% and reduced in weight by 700 grams (26%) while increasing efficiency (more range for the same battery) and keeping the torque performance, compared to the prior version.
- Bosch’s motor is the most efficient on the market today with the flattest torque curve. This means that at any cadence between 30-110rpm the torque is even and available to the rider.
- Bosch has the most responsive (fastest processing speed) torque sensor on the market. It’s 20x faster than the nearest competitor. This means the system adds assistance faster and also shuts off faster when the rider stops pedaling.
- Bosch’s battery is the only UL listed battery and charger on the market. We are using Bosch’s new PowerTube battery in the 625 Wh size, integrated seamlessly into the frame to optimize low center of gravity.
|
|
|
|
|
|
|
|
|
|
|
|
|
Specs & Information
- FRAME NINER WFO E9 180MM TRAVEL
- FORK ROCKSHOX ZEB R 180MM
- SHOCK ROCKSHOX SUPER DELUXE COIL SELECT R 205X65MM TRUNNION (S-350LB, M-400LB, L-450LB)
- MOTOR BOSCH GEN4 PERFORMANCE LINE CX 20MPH
- DISPLAY BOSCH PURION
- BATTERY BOSCH POWERTUBE 625WH
- FRONT WHEEL STANS NOTUBES FLOW D 29, FORMULA CL-811 HUB 110X15MM FRONT
- REAR WHEEL STANS NOTUBES FLOW D 27.5 , FORMULA ECT-148S HUB 148X12MM REAR
- TUBES/SEALANT TUBES
- FRONT TIRE MAXXIS MINION DHF 3C/EXO/TR 29X2.5WT FRONT
- REAR TIRE MAXXIS AGGRESSOR 2C/EXO/TR 27.5X2.8WT REAR
- BRAKES SRAM GUIDE RE
- BRAKE ROTORS SRAM CENTERLINE 200MM CENTERLOCK
- BRAKE LEVERS SRAM GUIDE RE
- FRONT SHIFTER N/A
- CHAIN SRAM SX EAGLE 12SP
- FRONT DERAILLEUR N/A
- REAR SHIFTER SRAM SX EAGLE 12SP
- CASSETTE SRAM PG1210 EAGLE 11-50T
- REAR DERAILLEUR SRAM SX EAGLE 12SP
- BOTTOM BRACKET N/A
- CRANKSET PRAXIS BOSCH G4 ISIS 165MM WITH SRAM DM EAGLE RING 36T
- SEATPOST KS LEV SI (S-100MM, MD-125MM, LG-150MM)
- SADDLE NINER CUSTOM TR WITH CR-MO RAILS, PRINTED NINER GRAPHIC
- STEM RACE FACE AEFFECT R 780MM WIDE, 20MM RISE, 35MM CLAMP
- HANDLEBAR RACE FACE AEFFECT R 780MM WIDE, 20MM RISE, 35MM CLAMP
- GRIPS NINER GRRRIPS L/O NYLON FLANGED
- HEADSET NINER INTERNAL ZS SHIS DESCRIPTION ZS44/28.6 | ZS56/40
- APPROX. WEIGHT 55.5 LBS/ 25.2 KG
|
|
|
|
|
|
|