Nitto SP-5 Seatpost
- Part # 52575
- Model : NITTO SP-5 Seatpost
- Supplier Part # SP-5 CP 22.2x410 (CP)
- SEATPOST NITTO SP-5 STRAIGHT 410x22.2 CP
Adjusting the Micro I-Beam Seatpost: (This is once the saddle is already mounted on the seat post):
Back out the bolt on the clamp till you can see most of the head of the bolt.
Twist the saddle from side to side till you hear a snap (which releases the clamps from the beam and head)
Adjust the tilt, fore and aft position of saddle and then tighten the bolt with one finger pressing against the back of the nut.
|
