 |
 |
 |
|
SE Bikes Fat Quad 26 BMX Bike Cloud Sparkle: It was only a matter of time until we created the fattest Quad of them all, the Fat Quad! This fat BMX bike is centered around the unique Quadangle frame design featuring an oversized downtube, integrated head tube and a legendary looptail rear end. New this year is an upgrade to Tektro Auriga hydraulic disc brakes. Once you go fat, you never go back...
- 6061 aluminum Quadangle frame design, internally-machined integrated head tube, symmetrical looptail rear end, 100mm bottom bracket, 170mm-spaced rear dropouts
- Full Cr-Mo Landing Gear forks with 135mm-spaced dropouts
- Vee Tire Co x SE Racing Chicane, 26" x 3.50" tires run fast and smooth at 30psi
- Oakley B1-B grips with SE donuts
- SE Flyer seat with bottle opener
- Cr-Mo SE Big Honkin’ cruiser bars
- External bottom bracket
- Tektro Auriga hydraulic disc brakes featuring dual pistons, automatic caliper positioning system, 160mm rear rotor, 180mm front rotor
- SE 3-piece V-Ridge cranks with alloy SE sprocket
- 35.8 pounds
- TOP TUBE, ACTUAL 22.2"
- SEAT TUBE, CENTER TO TOP 14.9"
- SEAT TUBE ANGLE 72°
- HEAD TUBE ANGLE 70°
- CHAINSTAY LENGTH 17.8"
- WHEELBASE 42.6"
- BOTTOM BRACKET HEIGHT 12.4"
- STANDOVER 30"
- SUGGESTED RIDER SIZE 5'3"+ (160cm+)
- STEM 55mm
- HANDLEBAR WIDTH 29"
- CRANK 175mm
- WHEEL SIZE 26"
- SEAT POST DIAMETER 27.2mm
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Specs & Information
- FRAME 6061 Aluminum, Single Downtube Fat Quad Design, Internally-machined Integrated Head Tube, Looptail Rear End, Retro Dropouts, 100mm Euro Bottom Bracket, 170mm Spaced Dropouts, Disc Brake Tabs
- FORK Landing Gear, Full Cr-Mo, Disc Tabs, 450mm Axle to Crown, 38mm Offset, 135mm Spaced Dropouts
- CRANKSET SE V-Ridge 3-pc Cr-Mo Cranks,175mm, External Sealed Bearing Euro Bottom Bracket, 200mm Spindle length, 19mm Spindle Diameter, 27T Alloy SE Racing Sprocket
- PEDALS X-Pedo Low-profile Platform w/ Removable Pins
- CHAIN KMC S1
- WHEELSET Alloy 36H Hubs, Sealed Rear, 135mm Front Hub & 170mm Rear Hub, w/ SE Bubble Fat 65mm Rims, 14T Cassette, Stainless Spokes
- TIRES Vee Tire Co x SE Racing Chicane, 26" x 3.5", 72TPI, Front & Rear,
- BRAKESET Tektro Auriga, Hydraulic Disc, Easy to Adjust Open System, Dual Piston, Automatic Caliper Positioning, 180mm Front Rotor, 160mm Rear Rotor
- BRAKE LEVERS Tektro Auriga, 2-Finger Alloy, Front & Rear
- HEADSET FSA Orbit CE, Sealed 1-1/8" Integrated
- HANDLEBAR Big Honkin' Cr-Mo Cruiser Bar, 29" x 7", 12° Backsweep, 2° Upsweep
- STEM Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, 55mm Reach
- GRIPS Special Edition ODI Mushroom II Grips, Made in USA, w/ SE Donuts
- SEAT SE Flyer Seat w/ Custom SE Bottle Opener Brace
- SEATPOST Micro-Adjust Alloy, 27.2mm
- SEAT CLAMP SE Racing Champ Clamp, Alloy, 31.8mm Inner Diameter
- ACCESSORIES Alloy Valve Caps, SE Chain Tensioners
- WEIGHT 35.8 lbs / 16.23 kgs
|
|
|
|
|
|
|
