 |
 |
 |
|
SE Bikes Maniacc Flyer 27.5+ BMX Bike SE Blue: The 27.5”+ Maniacc Flyer is definitely an eye catcher! This beast of a bike is built around oversized 27.5” x 3.0” Vee x SE Speedster tires. The frame features an internal headset, mid-bottom bracket, and a short rear end to make it easier to get that wheel up. Whether raising it up on the streets or hitting the dirt jumps, skatepark or ramps, Maniacc Flyer is the bike you need!
Key Features
- 6061 Aluminum floval tubing frame, symmetrical rear end, internal headset, mid bottom bracket, 142mm-spaced SE Wave dropouts
- Cr-Mo Landing Gear forks with 110mm-spaced dropouts
- Vee Tire Co Speedster 27.5” x 3.0” tires with optimal speed and grip at 30psi
- SE Bike Life grips with rubber end plugs
- Raise It Up! seat with grippy top cover
- Tektro MD-280 mechanical disc brakes
- SE Wheelie pegs, SE chain tensioners, and alloy valve caps included
- 33.8 pounds
- TOP TUBE, ACTUAL 22.9"
- SEAT TUBE, CENTER TO TOP 16.1"
- SEAT TUBE ANGLE 73°
- HEAD TUBE ANGLE 71°
- CHAINSTAY LENGTH 17.3"
- WHEELBASE 42.6"
- BOTTOM BRACKET HEIGHT 12.4"
- STANDOVER 30.5"
- SUGGESTED RIDER SIZE 5'3"+ (160cm+)
- STEM 55mm
- HANDLEBAR WIDTH 30"
- CRANK 175mm
- WHEEL SIZE 27.5"
- SEAT POST DIAMETER 27.2mm
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Specs & Information
- FRAME 6061 Aluminum Floval Tubing, Internal Head Tube, 68mm Mid Bottom Bracket, Symmetrical Rear End, Disc Brake Tabs, 142mm Spaced SE Wave Dropouts
- FORK Landing Gear, Cr-Mo, 430mm Axle to Crown, 39mm Offset, 110mm Spaced Dropouts, Disc Brake Tabs
- CRANKSET SE 3-pc Cr-Mo, 175mm, Sealed Bearing Mid Bottom Bracket, 160mm Spindle Length, 19mm Spindle Diameter, 33T SE Sprocket
- PEDALS SE Nylon Fiber Platform
- CHAIN KMC S1
- WHEELSET Alloy 36H Nutted Hubs, Sealed Rear, 110mm Front Hub & 142mm Rear Hub, w/ 42mm Double-Wall Disc Rims, 16T Cassette, Stainless Spokes
- TIRES Vee Tire Co x SE Racing Speedster, 27.5" x 3.0" Front & Rear
- BRAKESET Tektro Aries, MD-280, Mechanical Disc, 160mm Rotors Front & Rear
- BRAKE LEVERS Tektro MT2.1, 2-Finger Alloy Front & Rear
- HEADSET FSA Internal, No.10, 1-1/8"
- HANDLEBAR Big Honkin' Cruiser Bar, 30" x 6", 10° Backsweep, 1° Upsweep
- STEM SE Bike Life Alloy Top-Load, 55mm Reach
- GRIPS SE Bike Life Grips w/ SE Rubber End Plugs
- SEAT SE Maniacc Flyer Seat w/ Super Grippy Top Cover
- SEATPOST Race Rocker Micro-Adjust Alloy, 27.2mm
- SEAT CLAMP Alloy, 31.8mm Inner Diameter
- ACCESSORIES SE Bike Life Wheelie Pegs, Alloy Valve Caps
- WEIGHT 33.8 lbs / 15.33 kgs
|
|
|
|
|
|
|
